Product Details
This Whiteline Front Control Arm Lower Outer Bushing fits the 1971-1974 Mazda RX-2 Base (S10A). You receive 4 bushings. Position: front. The part number is W21082.
Bushings work out of sight, but they decide how well a suspension holds its geometry. A soft or tired control arm bushing allows play that shows up as vague steering, a wandering feel under braking, or a clunk over bumps. Fitting a firmer one takes that slack out. The polyurethane used here deflects much less than the original rubber under the same load.
Installation is rated easy, with about 1.5 hours of work listed. Plan on a wheel alignment afterward. We also list Non-Adjustable 24mm Front Sway Bar for the RX-2.
Features
- Bushing compound: Oil, grease, ozone, and weather do not break down the synthetic elastomer used in the bushings.
- Material: Polyurethane construction.
- Self-lubricating: Built-in grease reservoirs provide continual lubrication and reduce friction.
Specifications
| Part Number | W21082 |
| Part Name | Control Arm Bushing |
| Vehicle | 1971-1974 Mazda RX-2 Base |
| Drivetrain | RWD |
| Chassis Code | S10A |
| Bushing 1 Inner Diameter | 17 mm |
| Bushing 1 Length | 23 mm |
| Bushing 1 Outer Diameter | 27.5 mm |
| Bushing 2 Inner Diameter | 17 mm |
| Bushing 2 Length | 23 mm |
| Bushing 2 Outer Diameter | 27.5 mm |
| Bushing Quantity | 4 |
| Grade Type | Regular |
| Grease Fitting Included | No |
| Inside Diameter | 17 mm |
| Installation Difficulty | Easy |
| Installation Time (hrs) | 1.5 |
| Kit Contents | 4 Bushings |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Outside Diameter | 27.5 mm |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | - |



