Product Details
This Whiteline Front Control Arm Lower Inner Rear Bushing (Standard Repl. w/ New Housing) fits the 1995-2000 Subaru Legacy Brighton (BD/BG/BE/BH). Whiteline's note for this fit: Standard Replacement: includes new housing. The kit contains 2 housings, 2 tubes, 2 washers, and 2 nuts. Placement: front. Order it as part number W53515.
A fresh control arm bushing is one of the more cost-effective ways to bring a tired suspension back. It swaps the worn factory part for one that holds the arm steady again while keeping the ride close to stock.
Expect a difficult job of about 2.5 hours. Plan on a wheel alignment afterward. To go with it on the Legacy, see Adjustable Rear Sway Bar Link, 14mm Adjustable Front Camber Bolts, and Front and Rear Sway Bar Kit.
Features
- Material: Polyurethane construction.
- Bushing compound: A synthetic elastomer compound resists oil, grease, ozone, and weathering.
- Install guide: Instructions for fitting are packed in the box.
- Self-lubricating: Grease reservoirs inside the bushing feed lubrication as it moves.
- Corrosion protection: Rust protection comes from plating on the metal parts.
- Compliance voids: Molded voids give the bushing room to flex where it needs to.
Specifications
| Part Number | W53515 |
| Part Name | Control Arm Bushing |
| Vehicle | 1995-2000 Subaru Legacy Brighton |
| Drivetrain | FWD/AWD |
| Chassis Code | BD/BG/BE/BH |
| Bushing 1 Inner Diameter | 20.4 mm |
| Bushing 1 Length | 50.6 mm |
| Bushing 1 Outer Diameter | 56 mm |
| Bushing 2 Inner Diameter | 20.4 mm |
| Bushing 2 Length | 50.6 mm |
| Bushing 2 Outer Diameter | 56 mm |
| Bushing Quantity | 2 |
| Grade Type | Regular |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 2.5 |
| Kit Contents | 2 Housings, 2 Tubes, 2 Washers, 2 Nuts |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Outside Diameter | 56 mm |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | Standard Replacement - includes new housing |

