Product Details
This Whiteline Front Control Arm Lower Inner Rear Bushing (Standard Repl. w/ New Housing) fits the 1995-1999 Subaru Legacy Outback (BD/BG/BE/BH). Whiteline part number: W53515. You receive 2 housings, 2 tubes, 2 washers, and 2 nuts. It goes on the front of the vehicle. Whiteline's note for this fit: Standard Replacement: includes new housing.
Control arm bushings wear out quietly. Over time the rubber hardens, cracks, or tears, and the arm starts to move in ways its designers did not intend, which shows up as clunks, vague steering, or uneven tire wear. A standard replacement bushing puts the pivot back to the way the car was built.
Whiteline rates the install as difficult and lists about 2.5 hours. Plan on a wheel alignment afterward. To go with it on the Legacy Outback, see Adjustable Rear Sway Bar Link, 14mm Adjustable Front Camber Bolts, and Front Strut Tower Brace Quick Release Kit.
Features
- Corrosion protection: Plated finish keeps rust off the hardware.
- Bushing compound: The bushing material stands up to oil, grease, ozone, and weather.
- Compliance voids: Voids molded into the bushing allow suspension articulation and soften sharp road inputs.
- Self-lubricating: The bushing carries its own grease supply in internal reservoirs, so it keeps moving freely.
- Install guide: An install guide comes in the box.
- Material: Polyurethane construction.
Specifications
| Part Number | W53515 |
| Part Name | Control Arm Bushing |
| Vehicle | 1995-1999 Subaru Legacy Outback |
| Drivetrain | AWD |
| Chassis Code | BD/BG/BE/BH |
| Bushing 1 Inner Diameter | 20.4 mm |
| Bushing 1 Length | 50.6 mm |
| Bushing 1 Outer Diameter | 56 mm |
| Bushing 2 Inner Diameter | 20.4 mm |
| Bushing 2 Length | 50.6 mm |
| Bushing 2 Outer Diameter | 56 mm |
| Bushing Quantity | 2 |
| Grade Type | Regular |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 2.5 |
| Kit Contents | 2 Housings, 2 Tubes, 2 Washers, 2 Nuts |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Outside Diameter | 56 mm |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | Standard Replacement - includes new housing |

