Product Details
This Whiteline Front Control Arm Lower Inner Rear Bushing (Standard Repl.) fits the 2006-2008 Subaru Forester (SG). Chassis code: SG. This part is for the front of the vehicle. You receive 4 bushings, 2 tubes, and 2 washers. Whiteline's note for this fit: Standard Replacement. Order it as part number W51710.
A fresh control arm bushing is one of the more cost-effective ways to bring a tired suspension back. It swaps the worn factory part for one that holds the arm steady again while keeping the ride close to stock.
Installation is rated difficult, with about 2.5 hours of work listed. Plan on a wheel alignment afterward. We also list 14mm Adjustable Front Camber Bolts, Adjustable Sway Bar Vehicle Link Kit, and 22mm Front Sway Bar for the Forester.
Features
- Bushing compound: Oil, grease, ozone, and weather do not break down the synthetic elastomer used in the bushings.
- Grease: Supplied with molybdenum disulfide grease for extended service life.
- Corrosion protection: Metal parts are plated to resist rust over the long term.
- Bushing material: Made of polyurethane, which resists deflection better than soft rubber.
- Install guide: Step-by-step installation instructions come with it.
- Easy to fit: Made with the installer in mind, so it goes in without special equipment.
Specifications
| Part Number | W51710 |
| Part Name | Control Arm Bushing |
| Vehicle | 2006-2008 Subaru Forester |
| Chassis Code | SG |
| Bushing 1 Inner Diameter | 20.4 mm |
| Bushing 1 Length | 50.6 mm |
| Bushing 1 Outer Diameter | 56 mm |
| Bushing 2 Inner Diameter | 20.4 mm |
| Bushing 2 Length | 50.6 mm |
| Bushing 2 Outer Diameter | 56 mm |
| Bushing Color | Black |
| Bushing Material | Polyurethane |
| Bushing Quantity | 4 |
| Color | Black |
| Durometer | 72 |
| Grade Type | Regular |
| Grease Fitting Included | No |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 2.5 |
| Kit Contents | 4 Bushings, 2 Tubes, 2 Washers |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Mounting Type | Press In |
| Outside Diameter | 56 mm |
| Universal or Specific Fit | Specific Fit |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | Standard Replacement |



