Product Details
This Whiteline Front Control Arm Lower Inner Rear Bushing (Standard Repl.) fits the 1998-2002 Volkswagen Cabrio GLS (A3). Whiteline's note for this fit: Standard Replacement. Placement: front. The kit contains 2 shell bushings and 2 tubes. Part number W53188.
Control arm bushings wear out quietly. Over time the rubber hardens, cracks, or tears, and the arm starts to move in ways its designers did not intend, which shows up as clunks, vague steering, or uneven tire wear. A standard replacement bushing puts the pivot back to the way the car was built.
Installation is rated difficult, with about 2.5 hours of work listed. Plan on a wheel alignment afterward. Other Whiteline parts we list for the Cabrio: 12mm Adjustable Front Camber Bolts and Adjustable Front Sway Bar Link (Models w/ Pressed Steel Arms).
Features
- Grease: Supplied with molybdenum disulfide grease for extended service life.
- Self-lubricating: Grease reservoirs inside the bushing feed lubrication as it moves.
- Finish: Powder coat finish guards the metal against chips and corrosion.
- Bonded design: A bonded design adds strength for high load applications.
- Material: The part is made of polyurethane.
- Bushing compound: Oil, grease, ozone, and weather do not break down the synthetic elastomer used in the bushings.
Specifications
| Part Number | W53188 |
| Part Name | Control Arm Bushing |
| Vehicle | 1998-2002 Volkswagen Cabrio GLS |
| Chassis Code | A3 |
| Bushing 1 Inner Diameter | 12.2 mm |
| Bushing 1 Outer Diameter | 59.8 mm |
| Bushing Quantity | 2 Shell Bushings |
| Grade Type | Regular |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 2.5 |
| Kit Contents | 2 Shell Bushings, 2 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | Standard Replacement |


