Product Details
This Whiteline Front Control Arm Lower Inner Rear Bushing (Standard Repl.) fits the 1998-2002 Subaru Legacy (BE/BH). This part is for the front of the vehicle. Application note: Standard Replacement. Chassis code: BE/BH. In the box: 4 bushings, 2 tubes, and 2 washers. Order it as part number W51710.
Control arm bushings wear out quietly. Over time the rubber hardens, cracks, or tears, and the arm starts to move in ways its designers did not intend, which shows up as clunks, vague steering, or uneven tire wear. A standard replacement bushing puts the pivot back to the way the car was built.
Whiteline rates the install as difficult and lists about 2.5 hours. Plan on a wheel alignment afterward. We also list Adjustable Rear Sway Bar Link, 14mm Adjustable Front Camber Bolts, and Front and Rear Sway Bar Kit for the Legacy.
Features
- Corrosion protection: A protective plating covers the metal components to guard against corrosion.
- Material: Polyurethane construction.
- Self-lubricating: The bushing carries its own grease supply in internal reservoirs, so it keeps moving freely.
- Easy to fit: Installation does not call for special skills or tools.
- Grease: Molybdenum disulfide grease is included to help the parts last.
- Install guide: Whiteline packs an install guide with it.
Specifications
| Part Number | W51710 |
| Part Name | Control Arm Bushing |
| Vehicle | 1998-2002 Subaru Legacy |
| Drivetrain | FWD/AWD |
| Chassis Code | BE/BH |
| Bushing 1 Inner Diameter | 20.4 mm |
| Bushing 1 Length | 50.6 mm |
| Bushing 1 Outer Diameter | 56 mm |
| Bushing 2 Inner Diameter | 20.4 mm |
| Bushing 2 Length | 50.6 mm |
| Bushing 2 Outer Diameter | 56 mm |
| Bushing Color | Black |
| Bushing Material | Polyurethane |
| Bushing Quantity | 4 |
| Color | Black |
| Durometer | 72 |
| Grade Type | Regular |
| Grease Fitting Included | No |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 2.5 |
| Kit Contents | 4 Bushings, 2 Tubes, 2 Washers |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Mounting Type | Press In |
| Outside Diameter | 56 mm |
| Universal or Specific Fit | Specific Fit |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | Standard Replacement |



