Product Details
This Whiteline Front Control Arm Lower Inner Rear Bushing (Standard Repl.) fits the 1994-2004 Subaru Legacy GT (BD/BG/BE/BH/BL/BP). It goes on the front of the vehicle. Whiteline part number: W51710. Application note: Standard Replacement. You receive 4 bushings, 2 tubes, and 2 washers.
Control arm bushings wear out quietly. Over time the rubber hardens, cracks, or tears, and the arm starts to move in ways its designers did not intend, which shows up as clunks, vague steering, or uneven tire wear. A standard replacement bushing puts the pivot back to the way the car was built.
Whiteline rates the install as difficult and lists about 2.5 hours. Plan on a wheel alignment afterward. We also list Adjustable Rear Sway Bar Link, 14mm Adjustable Front Camber Bolts, and Front and Rear Sway Bar Kit for the Legacy.
Features
- Bushing compound: Oil, grease, ozone, and weather do not break down the synthetic elastomer used in the bushings.
- Grease: Molybdenum disulfide grease comes with it for a longer service life.
- Material: The part is made of polyurethane.
- Corrosion protection: Plated finish keeps rust off the hardware.
- Bushing material: Made of polyurethane, which resists deflection better than soft rubber.
- Easy to fit: Designed so the install needs no specialized skills or tools.
Specifications
| Part Number | W51710 |
| Part Name | Control Arm Bushing |
| Vehicle | 1994-2004 Subaru Legacy GT |
| Drivetrain | FWD/AWD |
| Chassis Code | BD/BG/BE/BH/BL/BP |
| Bushing 1 Inner Diameter | 20.4 mm |
| Bushing 1 Length | 50.6 mm |
| Bushing 1 Outer Diameter | 56 mm |
| Bushing 2 Inner Diameter | 20.4 mm |
| Bushing 2 Length | 50.6 mm |
| Bushing 2 Outer Diameter | 56 mm |
| Bushing Color | Black |
| Bushing Material | Polyurethane |
| Bushing Quantity | 4 |
| Color | Black |
| Durometer | 72 |
| Grade Type | Regular |
| Grease Fitting Included | No |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 2.5 |
| Kit Contents | 4 Bushings, 2 Tubes, 2 Washers |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Mounting Type | Press In |
| Outside Diameter | 56 mm |
| Universal or Specific Fit | Specific Fit |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | Standard Replacement |



