Product Details
This Whiteline Front Control Arm Lower Inner Rear Bushing (Standard Repl.) fits the 1990-2004 Subaru Legacy L (BC/BF/BD/BG/BE/BH/BL/BP). Placement: front. The kit contains 4 bushings, 2 tubes, and 2 washers. The part number is W51710. Application note: Standard Replacement.
Control arm bushings wear out quietly. Over time the rubber hardens, cracks, or tears, and the arm starts to move in ways its designers did not intend, which shows up as clunks, vague steering, or uneven tire wear. A standard replacement bushing puts the pivot back to the way the car was built.
Expect a difficult job of about 2.5 hours. Plan on a wheel alignment afterward. Other Whiteline parts we list for the Legacy: Adjustable Rear Sway Bar Link, 14mm Adjustable Front Camber Bolts, and Front and Rear Sway Bar Kit.
Features
- Install guide: Instructions for fitting are packed in the box.
- Corrosion protection: A protective plating covers the metal components to guard against corrosion.
- Material: Polyurethane construction.
- Grease: Supplied with molybdenum disulfide grease for extended service life.
- Bushing compound: A synthetic elastomer compound resists oil, grease, ozone, and weathering.
- Bushing material: Polyurethane is firmer than the factory rubber, so it deflects less under load.
Specifications
| Part Number | W51710 |
| Part Name | Control Arm Bushing |
| Vehicle | 1990-2004 Subaru Legacy L |
| Chassis Code | BC/BF/BD/BG/BE/BH/BL/BP |
| Bushing 1 Inner Diameter | 20.4 mm |
| Bushing 1 Length | 50.6 mm |
| Bushing 1 Outer Diameter | 56 mm |
| Bushing 2 Inner Diameter | 20.4 mm |
| Bushing 2 Length | 50.6 mm |
| Bushing 2 Outer Diameter | 56 mm |
| Bushing Color | Black |
| Bushing Material | Polyurethane |
| Bushing Quantity | 4 |
| Color | Black |
| Durometer | 72 |
| Grade Type | Regular |
| Grease Fitting Included | No |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 2.5 |
| Kit Contents | 4 Bushings, 2 Tubes, 2 Washers |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Mounting Type | Press In |
| Outside Diameter | 56 mm |
| Universal or Specific Fit | Specific Fit |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | Standard Replacement |



