Product Details
This Whiteline Front Control Arm Lower Inner Rear Bushing Only fits the 2010-2011 Subaru Forester XT Premium (SH). Whiteline's note for this fit: Standard Replacement. Included: 2 shell bushings and 2 tubes. Position: front. Whiteline part number: W53353.
Every time the wheel moves, the control arm swings on its bushings. When they are soft or worn, the arm shifts under load, the alignment changes as the car moves, and steering and braking feel less precise. A stiffer bushing cuts that unwanted movement while still letting the arm pivot freely. The polyurethane used here deflects much less than the original rubber under the same load.
Installation is rated difficult, with about 2.5 hours of work listed. Get the car aligned once it is back on the ground. To go with it on the Forester, see Adjustable Rear Sway Bar Link, 14mm Adjustable Front Camber Bolts, and Front Strut Tower Brace Quick Release Kit.
Features
- Material: Built from polyurethane.
- Bushing compound: The bushing material stands up to oil, grease, ozone, and weather.
- Bonded design: The bushing is bonded for extra strength under heavy loads.
- Corrosion protection: A protective plating covers the metal components to guard against corrosion.
- Finish: The metal parts are powder coated for durability.
- Install guide: Written install instructions are included with the part.
Specifications
| Part Number | W53353 |
| Part Name | Control Arm Bushing |
| Vehicle | 2010-2011 Subaru Forester XT Premium |
| Chassis Code | SH |
| Bushing 1 Inner Diameter | 19.5 mm |
| Bushing 1 Outer Diameter | 60 mm |
| Bushing Quantity | 2 Shell Bushings |
| Grade Type | Regular |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 2.5 |
| Kit Contents | 2 Shell Bushings, 2 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | Standard Replacement |


