Product Details
This Whiteline Front Control Arm Lower Inner Rear Bushing Only fits the 2005-2008 Subaru Outback R L.L. Bean Edition (BP). The kit contains 2 shell bushings and 2 tubes. Order it as part number W53353. This part is for the front of the vehicle. Application note: Standard Replacement.
Every time the wheel moves, the control arm swings on its bushings. When they are soft or worn, the arm shifts under load, the alignment changes as the car moves, and steering and braking feel less precise. A stiffer bushing cuts that unwanted movement while still letting the arm pivot freely. The polyurethane used here deflects much less than the original rubber under the same load.
Whiteline rates the install as difficult and lists about 2.5 hours. An alignment is required after installation. Other Whiteline parts we list for the Outback: Adjustable Rear Sway Bar Link, 14mm Adjustable Front Camber Bolts, and Front and Rear Sway Bar Kit.
Features
- Bonded design: The bushing is bonded for extra strength under heavy loads.
- Install guide: Step-by-step installation instructions come with it.
- Finish: Powder coating covers the metal for protection against chips and rust.
- Corrosion protection: A protective plating covers the metal components to guard against corrosion.
- Material: Built from polyurethane.
- Self-lubricating: Grease reservoirs inside the bushing feed lubrication as it moves.
Specifications
| Part Number | W53353 |
| Part Name | Control Arm Bushing |
| Vehicle | 2005-2008 Subaru Outback R L.L. Bean Edition |
| Chassis Code | BP |
| Bushing 1 Inner Diameter | 19.5 mm |
| Bushing 1 Outer Diameter | 60 mm |
| Bushing Quantity | 2 Shell Bushings |
| Grade Type | Regular |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 2.5 |
| Kit Contents | 2 Shell Bushings, 2 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | Standard Replacement |



