Product Details
This Whiteline Front Control Arm Lower Inner Rear Bushing fits the 2017-2020 Toyota 86 Base. The part number is W0509. Application note: Recommended for motorsport use only. The kit contains 4 bushings and 2 tubes. This part is for the front of the vehicle. Chassis code: ZN6. The listing names the Base trim.
Bushings work out of sight, but they decide how well a suspension holds its geometry. A soft or tired control arm bushing allows play that shows up as vague steering, a wandering feel under braking, or a clunk over bumps. Fitting a firmer one takes that slack out. Polyurethane resists deflection far better than the soft rubber it replaces.
Installation is rated difficult, with about 2.5 hours of work listed. An alignment is required after installation. Working on the same car? We also list Adjustable Rear Sway Bar Link, 14mm Adjustable Front Camber Bolts, and Adjustable Sway Bar Vehicle Link Kit for the Toyota 86.
Features
- Bushing compound: The elastomer formulation is chosen to shrug off oil, grease, ozone, and the elements.
- Install guide: Whiteline packs an install guide with it.
- Material: Made from polyurethane.
- Finish: Powder coat finish guards the metal against chips and corrosion.
- Grease: Supplied with molybdenum disulfide grease for extended service life.
- Corrosion protection: Rust protection comes from plating on the metal parts.
Specifications
| Part Number | W0509 |
| Part Name | Control Arm Bushing |
| Vehicle | 2017-2020 Toyota 86 Base |
| Drivetrain | RWD |
| Chassis Code | ZN6 |
| Bushing 1 Inner Diameter | 12.5 mm |
| Bushing 1 Outer Diameter | 37.3 mm |
| Bushing Quantity | 4 Bushings |
| Grade Type | Performance |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 2.5 |
| Kit Contents | 4 Bushings, 2 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | Recommended for MOTORSPORT use only |