Product Details
This Whiteline Front Control Arm Lower Inner Rear Bushing fits the 1987-1995 BMW 325is 3 Series. Position: front. Part number W81924. In the box: 2 shell bushings. Whiteline's note for this fit: Adds .5 degrees Caster.
A standard bushing only restores what the factory built. This one is designed to change the geometry, adding positive caster and changing front anti-dive behavior, in addition to resisting the deflection that soft rubber allows.
Whiteline rates the install as difficult and lists about 2.5 hours. An alignment is required after installation. Other Whiteline parts we list for the 325is 3 Series: Front Strut Tower Brace, Front Strut Tower Brace Quick Release Kit, and Rear Trailing Arm Lower Front Bushing.
Features
- Bushing compound: Oil, grease, ozone, and weather do not break down the synthetic elastomer used in the bushings.
- Bonded design: A bonded design adds strength for high load applications.
- Bushing material: The bushing material is polyurethane, a firmer choice than rubber.
- Material: Made from polyurethane.
- Corrosion protection: A protective plating covers the metal components to guard against corrosion.
- Caster: Caster is optimized for stable steering and good contact through roll.
Specifications
| Part Number | W81924 |
| Part Name | Control Arm Bushing |
| Vehicle | 1987-1995 BMW 325is 3 Series |
| Drivetrain | RWD |
| Chassis Code | E30/E36 |
| Bushing Color | Black |
| Bushing Inside Diameter | 19.4 mm |
| Bushing Length | 32.9 mm |
| Bushing Material | Polyurethane |
| Bushing Outside Diameter | 60.5 mm |
| Bushing Quantity | 2 |
| Durometer | 85 |
| Grade Type | Regular |
| Hardware Included | No |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 2.5 |
| Kit Contents | 2 Shell Bushings |
| Material | Polyurethane |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | Adds .5 Deg Caster |
Fitment for 325is control arm bushings
Fits the 1987-1995 BMW 325is 3 Series. Each model year is listed below.