Product Details
This Whiteline Front Control Arm Lower Inner Rear Bushing Comfort fits the 2003 Subaru Legacy L SE (BE/BH/BL/BP). Position: front. You receive 2 housings, 2 washers, and 2 nuts. Whiteline's note for this fit: Adds 0.5 Caster & Anti Lift Comfort Option Uses 75 Duro Bushing. Part number KCA361.
This kit does more than replace rubber. Its offset design moves the pivot point of the lower control arm to add positive caster and change how the front end resists dive under braking, which improves straight-line stability and turn-in feel.
Whiteline rates the install as difficult and lists about 2.5 hours. Get the car aligned once it is back on the ground. We also list Adjustable Rear Sway Bar Link, 14mm Adjustable Front Camber Bolts, and Front and Rear Sway Bar Kit for the Legacy.
Features
- Corrosion protection: Metal parts are plated to resist rust over the long term.
- Install guide: Instructions for fitting are packed in the box.
- Self-lubricating: The bushing carries its own grease supply in internal reservoirs, so it keeps moving freely.
- Finish: The metal is powder coated, which resists corrosion and wear.
- Material: Built from polyurethane.
Specifications
| Part Number | KCA361 |
| Part Name | Control Arm Bushing |
| Vehicle | 2003 Subaru Legacy L SE |
| Chassis Code | BE/BH/BL/BP |
| Bushing 1 Inner Diameter | 20 mm |
| Bushing 1 Length | 52.5 mm |
| Bushing 1 Outer Diameter | 39.5 mm |
| Bushing 2 Inner Diameter | 20 mm |
| Bushing 2 Length | 52.5 mm |
| Bushing 2 Outer Diameter | 39.5 mm |
| Bushing Quantity | 2 |
| Grade Type | Performance |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 2.5 |
| Kit Contents | 2 Housings, 2 Washers, 2 Nuts |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Outside Diameter | 39.5 mm |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | Adds 0.5 Caster & Anti Lift Comfort Option Uses 75 Duro Bushing |


