Product Details
This Whiteline Front Control Arm Lower Inner Rear Bushing (Anti-Lift/Caster) fits the 2009 Subaru Outback 3.0 R Limited . Order it as part number KCA334. Position: front. Application note: Adds +0.5 degrees Caster + Anti-Lift. Included: 2 shell bushings, 4 bushings, 2 tubes, and 2 washers.
This kit does more than replace rubber. Its offset design moves the pivot point of the lower control arm to add positive caster and change how the front end resists dive under braking, which improves straight-line stability and turn-in feel.
Expect a difficult job of about 3 hours. Plan on a wheel alignment afterward. Other Whiteline parts we list for the Outback: Adjustable Rear Sway Bar Link, 14mm Adjustable Front Camber Bolts, and Front and Rear Sway Bar Kit.
Features
- Finish: A powder coated finish resists corrosion and wear.
- Bonded design: The bushing is bonded for strength where loads are highest.
- Caster: Optimizes caster for better contact during roll and more stable steering.
- Bushing compound: Oil, grease, ozone, and weather do not break down the synthetic elastomer used in the bushings.
- Corrosion protection: Metal parts are plated to resist rust over the long term.
- Bump steer: Helps cut bump steer for steadier steering over bumps.
Specifications
| Part Number | KCA334 |
| Part Name | Control Arm Bushing |
| Vehicle | 2009 Subaru Outback 3.0 R Limited |
| Bushing 1 Inner Diameter | 17.2 mm |
| Bushing 1 Outer Diameter | 60 mm |
| Bushing Quantity | 2 Shell Bushings, 4 Bushings |
| Grade Type | Performance |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 3 |
| Kit Contents | 2 Shell Bushings, 4 Bushings, 2 Tubes, 2 Washers |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | Adds +0.5 Degrees Caster + Anti-Lift |



