Product Details
This Whiteline Front Control Arm Lower Inner Rear Bushing (Anti-Lift/Caster) fits the 2007 Subaru Outback 2.5i Basic (BR). Application note: Adds +0.5 degrees Caster + Anti-Lift. In the box: 2 shell bushings, 4 bushings, 2 tubes, and 2 washers. The part number is KCA334. Position: front.
Caster is the forward or backward lean of the steering axis, and more positive caster generally helps stability and steering return. This control arm bushing is made to add positive caster and alter anti-dive geometry, using a bushing swap rather than a major rebuild.
Whiteline rates the install as difficult and lists about 3 hours. Get the car aligned once it is back on the ground. To go with it on the Outback, see Adjustable Rear Sway Bar Link, 14mm Adjustable Front Camber Bolts, and Front and Rear Sway Bar Kit.
Features
- Install guide: Instructions for fitting are packed in the box.
- Self-lubricating: The bushing carries its own grease supply in internal reservoirs, so it keeps moving freely.
- Bushing compound: The elastomer formulation is chosen to shrug off oil, grease, ozone, and the elements.
- Corrosion protection: A protective plating covers the metal components to guard against corrosion.
- Caster: Adds caster for steadier steering and better tire contact in roll.
- Material: Made from polyurethane.
Specifications
| Part Number | KCA334 |
| Part Name | Control Arm Bushing |
| Vehicle | 2007 Subaru Outback 2.5i Basic |
| Chassis Code | BR |
| Bushing 1 Inner Diameter | 17.2 mm |
| Bushing 1 Outer Diameter | 60 mm |
| Bushing Quantity | 2 Shell Bushings, 4 Bushings |
| Grade Type | Performance |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 3 |
| Kit Contents | 2 Shell Bushings, 4 Bushings, 2 Tubes, 2 Washers |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | Adds +0.5 Degrees Caster + Anti-Lift |




