Product Details
This Whiteline Front Control Arm Lower Inner Rear Bushing (Anti-Lift/Caster) fits the 2004-2005 Subaru Outback Limited (BP). You receive 2 shell bushings, 4 bushings, 2 tubes, and 2 washers. This part is for the front of the vehicle. Whiteline part number: KCA334. Application note: Adds +0.5 degrees Caster + Anti-Lift.
This kit does more than replace rubber. Its offset design moves the pivot point of the lower control arm to add positive caster and change how the front end resists dive under braking, which improves straight-line stability and turn-in feel.
Whiteline rates the install as difficult and lists about 3 hours. Get the car aligned once it is back on the ground. To go with it on the Outback, see Adjustable Rear Sway Bar Link, 14mm Adjustable Front Camber Bolts, and Front and Rear Sway Bar Kit.
Features
- Bump steer: Designed to reduce unwanted bump steer and improve steering behavior.
- Caster: Adds caster to improve turn-in and directional stability.
- Corrosion protection: The hardware is plated to stand up to road conditions.
- Finish: The metal is powder coated, which resists corrosion and wear.
- Grease: Supplied with molybdenum disulfide grease for extended service life.
- Self-lubricating: Internal grease reservoirs keep the bushing lubricated as it works.
Specifications
| Part Number | KCA334 |
| Part Name | Control Arm Bushing |
| Vehicle | 2004-2005 Subaru Outback Limited |
| Chassis Code | BP |
| Bushing 1 Inner Diameter | 17.2 mm |
| Bushing 1 Outer Diameter | 60 mm |
| Bushing Quantity | 2 Shell Bushings, 4 Bushings |
| Grade Type | Performance |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 3 |
| Kit Contents | 2 Shell Bushings, 4 Bushings, 2 Tubes, 2 Washers |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | Adds +0.5 Degrees Caster + Anti-Lift |




