Product Details
This Whiteline Front Control Arm Lower Inner Rear Bushing fits the 2012-2014 Mitsubishi Lancer GT Sportback (CY). Application note: Standard Replacement. Part number W53382. In the box: 2 shell bushings and 2 tubes. It goes on the front of the vehicle.
A control arm bushing is the pivot where the arm joins the chassis or the wheel carrier. Factory rubber is chosen for quiet and comfort, so it squashes under braking, acceleration, and cornering and lets the arm move more than it should. A firmer replacement keeps the arm where it belongs, which steadies the alignment and gives the car a more consistent feel. The polyurethane used here deflects much less than the original rubber under the same load.
Installation is rated difficult, with about 2.5 hours of work listed. Plan on a wheel alignment afterward. We also list Adjustable Rear Sway Bar Link, 14mm Adjustable Front Camber Bolts, and Adjustable Sway Bar Vehicle Link Kit for the Lancer.
Features
- Bonded design: The bushing is bonded for strength where loads are highest.
- Self-lubricating: Built-in grease reservoirs provide continual lubrication and reduce friction.
- Grease: Supplied with molybdenum disulfide grease for extended service life.
- Install guide: Instructions for fitting are packed in the box.
- Bushing compound: The elastomer formulation is chosen to shrug off oil, grease, ozone, and the elements.
- Finish: The metal is powder coated, which resists corrosion and wear.
Specifications
| Part Number | W53382 |
| Part Name | Control Arm Bushing |
| Vehicle | 2012-2014 Mitsubishi Lancer GT Sportback |
| Chassis Code | CY |
| Drivetrain | AWD/FWD |
| Bushing 1 Inner Diameter | 14.3 mm |
| Bushing 1 Outer Diameter | 60.2 mm |
| Bushing Quantity | 2 Shell Bushings |
| Grade Type | Regular |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 2.5 |
| Kit Contents | 2 Shell Bushings, 2 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | Standard Replacement |



