Product Details
This Whiteline Front Control Arm Lower Inner Rear Bushing fits the 2011-2012 Hyundai Elantra Touring GLS, Touring SE (MD). It goes on the front of the vehicle. Included: 2 shell bushings. Whiteline's note for this fit: Adds +0.5 degrees Caster. Whiteline part number: KCA437.
A standard bushing only restores what the factory built. This one is designed to change the geometry, adding positive caster and changing front anti-dive behavior, in addition to resisting the deflection that soft rubber allows.
Installation is rated difficult, with about 2.5 hours of work listed. An alignment is required after installation. To go with it on the Elantra, see 14mm Adjustable Front Camber Bolts.
Features
- Bushing compound: The elastomer formulation is chosen to shrug off oil, grease, ozone, and the elements.
- Finish: Powder coating covers the metal for protection against chips and rust.
- Caster: Optimizes caster for better contact during roll and more stable steering.
- Bonded design: A bonded design adds strength for high load applications.
- Corrosion protection: Plated finish keeps rust off the hardware.
- Material: The part is made of polyurethane.
Specifications
| Part Number | KCA437 |
| Part Name | Control Arm Bushing |
| Vehicle | 2011-2012 Hyundai Elantra Touring GLS, Touring SE |
| Chassis Code | MD |
| Bushing 1 Inner Diameter | 14.3 mm |
| Bushing 1 Outer Diameter | 66.3 mm |
| Bushing Quantity | 2 Shell Bushings |
| Grade Type | Performance |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 2.5 |
| Kit Contents | 2 Shell Bushings |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | Adds +0.5 Degree Caster |



