Product Details
This Whiteline Front Control Arm Lower Inner Rear Bushing fits the 2008-2011 Mitsubishi Lancer GTS (CY). Whiteline's note for this fit: Standard Replacement. The part number is W53382. It goes on the front of the vehicle. Included: 2 shell bushings and 2 tubes.
Every time the wheel moves, the control arm swings on its bushings. When they are soft or worn, the arm shifts under load, the alignment changes as the car moves, and steering and braking feel less precise. A stiffer bushing cuts that unwanted movement while still letting the arm pivot freely. Polyurethane resists deflection far better than the soft rubber it replaces.
Installation is rated difficult, with about 2.5 hours of work listed. An alignment is required after installation. Other Whiteline parts we list for the Lancer: Adjustable Rear Sway Bar Link, 14mm Adjustable Front Camber Bolts, and Adjustable Sway Bar Vehicle Link Kit.
Features
- Material: Built from polyurethane.
- Self-lubricating: The bushing carries its own grease supply in internal reservoirs, so it keeps moving freely.
- Bonded design: A bonded design adds strength for high load applications.
- Grease: Molybdenum disulfide grease comes with it for a longer service life.
- Bushing compound: The elastomer formulation is chosen to shrug off oil, grease, ozone, and the elements.
- Install guide: Written install instructions are included with the part.
Specifications
| Part Number | W53382 |
| Part Name | Control Arm Bushing |
| Vehicle | 2008-2011 Mitsubishi Lancer GTS |
| Chassis Code | CY |
| Drivetrain | AWD/FWD |
| Bushing 1 Inner Diameter | 14.3 mm |
| Bushing 1 Outer Diameter | 60.2 mm |
| Bushing Quantity | 2 Shell Bushings |
| Grade Type | Regular |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 2.5 |
| Kit Contents | 2 Shell Bushings, 2 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | Standard Replacement |




