Product Details
This Whiteline Front Control Arm Lower Inner Rear Bushing fits the 2003 Subaru Legacy L SE (BE/BH/BL/BP). Order it as part number KCA319A. Application note: Adds 0.5 degrees Caster & Anti-Lift. It goes on the front of the vehicle. You receive 2 housings, 2 washers, and 2 nuts.
This kit does more than replace rubber. Its offset design moves the pivot point of the lower control arm to add positive caster and change how the front end resists dive under braking, which improves straight-line stability and turn-in feel.
Whiteline rates the install as difficult and lists about 2.5 hours. Get the car aligned once it is back on the ground. Other Whiteline parts we list for the Legacy: Adjustable Rear Sway Bar Link, 14mm Adjustable Front Camber Bolts, and Front and Rear Sway Bar Kit.
Features
- Grease: Moly grease is supplied to prolong the life of the parts.
- Bump steer: Helps cut bump steer for steadier steering over bumps.
- Bushing material: Polyurethane is firmer than the factory rubber, so it deflects less under load.
- Install guide: An install guide comes in the box.
- Finish: A powder coated finish resists corrosion and wear.
- Anodized alloy: The alloy is anodized, adding a durable protective layer.
Specifications
| Part Number | KCA319A |
| Part Name | Control Arm Bushing |
| Vehicle | 2003 Subaru Legacy L SE |
| Chassis Code | BE/BH/BL/BP |
| Bushing 1 Inner Diameter | 20 mm |
| Bushing 1 Length | 52.5 mm |
| Bushing 1 Outer Diameter | 39.5 mm |
| Bushing 2 Inner Diameter | 20 mm |
| Bushing 2 Length | 52.5 mm |
| Bushing 2 Outer Diameter | 39.5 mm |
| Bushing Color | Black |
| Bushing Material | Polyurethane |
| Bushing Quantity | 2 |
| Grade Type | Performance |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 2.5 |
| Kit Contents | 2 Housings, 2 Washers, 2 Nuts |
| Mounting Hardware Included | No |
| Outside Diameter | 39.5 mm |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | Adds 0.5 Degrees Caster & Anti-Lift |




