Product Details
This Whiteline Front Control Arm Lower Inner Rear Bushing fits the 2002-2006 Mitsubishi Lancer OZ Rally (CS). This part is for the front of the vehicle. The part number is W53382. Whiteline's note for this fit: Standard Replacement. The kit contains 2 shell bushings and 2 tubes.
Every time the wheel moves, the control arm swings on its bushings. When they are soft or worn, the arm shifts under load, the alignment changes as the car moves, and steering and braking feel less precise. A stiffer bushing cuts that unwanted movement while still letting the arm pivot freely. The polyurethane used here deflects much less than the original rubber under the same load.
Expect a difficult job of about 2.5 hours. Get the car aligned once it is back on the ground. We also list 14mm Adjustable Front Camber Bolts, Adjustable Sway Bar Vehicle Link Kit, and Rear Sway Bar Link for the Lancer.
Features
- Bonded design: The bushing is bonded for extra strength under heavy loads.
- Corrosion protection: Metal parts are plated to resist rust over the long term.
- Install guide: Instructions for fitting are packed in the box.
- Bushing compound: The elastomer formulation is chosen to shrug off oil, grease, ozone, and the elements.
- Finish: Powder coat finish guards the metal against chips and corrosion.
- Self-lubricating: Internal grease reservoirs keep the bushing lubricated as it works.
Specifications
| Part Number | W53382 |
| Part Name | Control Arm Bushing |
| Vehicle | 2002-2006 Mitsubishi Lancer OZ Rally |
| Drivetrain | FWD |
| Chassis Code | CS |
| Bushing 1 Inner Diameter | 14.3 mm |
| Bushing 1 Outer Diameter | 60.2 mm |
| Bushing Quantity | 2 Shell Bushings |
| Grade Type | Regular |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 2.5 |
| Kit Contents | 2 Shell Bushings, 2 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | Standard Replacement |




