Product Details
This Whiteline Front Control Arm Lower Inner Rear Bushing fits the 2000-2005 Toyota Echo Base (XP10). In the box: 2 shell bushings and 2 tubes. It goes on the front of the vehicle. Order it as part number W53299. Whiteline's note for this fit: Standard Replacement.
A control arm bushing is the pivot where the arm joins the chassis or the wheel carrier. Factory rubber is chosen for quiet and comfort, so it squashes under braking, acceleration, and cornering and lets the arm move more than it should. A firmer replacement keeps the arm where it belongs, which steadies the alignment and gives the car a more consistent feel. The polyurethane used here deflects much less than the original rubber under the same load.
Expect a difficult job of about 2.5 hours. An alignment is required after installation. Other Whiteline parts we list for the Echo: 14mm Adjustable Front Camber Bolts and Front Sway Bar Link Bushing Kit.
Features
- Self-lubricating: Built-in grease reservoirs provide continual lubrication and reduce friction.
- Corrosion protection: Rust protection comes from plating on the metal parts.
- Material: Polyurethane construction.
- Finish: Powder coating covers the metal for protection against chips and rust.
- Bushing compound: A synthetic elastomer compound resists oil, grease, ozone, and weathering.
- Install guide: An install guide comes in the box.
Specifications
| Part Number | W53299 |
| Part Name | Control Arm Bushing |
| Vehicle | 2000-2005 Toyota Echo Base |
| Chassis Code | XP10 |
| Bushing 1 Inner Diameter | 12.2 mm |
| Bushing 1 Outer Diameter | 54.9 mm |
| Bushing Quantity | 2 Shell Bushings |
| Grade Type | Regular |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 2.5 |
| Kit Contents | 2 Shell Bushings, 2 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | Standard Replacement |




