Product Details
This Whiteline Front Control Arm Lower Inner Rear Bushing fits the 1991-1994 Mercury Capri Base, XR2 (NA). Whiteline's note for this fit: Standard Replacement. The kit contains 2 bushings and 2 tubes. It goes on the front of the vehicle. Order it as part number W51141.
Bushings work out of sight, but they decide how well a suspension holds its geometry. A soft or tired control arm bushing allows play that shows up as vague steering, a wandering feel under braking, or a clunk over bumps. Fitting a firmer one takes that slack out. Polyurethane resists deflection far better than the soft rubber it replaces.
Expect a difficult job of about 2.5 hours. An alignment is required after installation. We also list 12mm Adjustable Front Camber Bolts, Front Strut Tower Brace Quick Release Kit, and Front Sway Bar Link Bushing (21mm OD) for the Capri.
Features
- Corrosion protection: The hardware is plated to stand up to road conditions.
- Self-lubricating: Grease reservoirs inside the bushing feed lubrication as it moves.
- Material: Made from polyurethane.
- Easy to fit: Made with the installer in mind, so it goes in without special equipment.
- Grease: Moly grease is supplied to prolong the life of the parts.
- Bushing compound: The elastomer formulation is chosen to shrug off oil, grease, ozone, and the elements.
Specifications
| Part Number | W51141 |
| Part Name | Control Arm Bushing |
| Vehicle | 1991-1994 Mercury Capri Base, XR2 |
| Chassis Code | NA |
| Bushing 1 Inner Diameter | 18.2 mm |
| Bushing 1 Outer Diameter | 48 mm |
| Bushing Quantity | 2 Bushings |
| Grade Type | Regular |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 2.5 |
| Kit Contents | 2 Bushings, 2 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | Standard Replacement |



