Product Details
This Whiteline Front Control Arm Lower Inner Rear Bushing fits the 1986-1988 BMW 325 3 Series (E30). Whiteline part number: W81924. It goes on the front of the vehicle. Whiteline's note for this fit: Adds .5 degrees Caster. You receive 2 shell bushings.
This kit does more than replace rubber. Its offset design moves the pivot point of the lower control arm to add positive caster and change how the front end resists dive under braking, which improves straight-line stability and turn-in feel.
Expect a difficult job of about 2.5 hours. Get the car aligned once it is back on the ground. We also list Front Strut Tower Brace Quick Release Kit, Heavy Duty 24mm Front Sway Bar, and Heavy Duty Blade Adjustable 16mm Rear Sway Bar for the 325 3 Series.
Features
- Material: Polyurethane construction.
- Caster: Caster is optimized for stable steering and good contact through roll.
- Bushing compound: Oil, grease, ozone, and weather do not break down the synthetic elastomer used in the bushings.
- Bonded design: The bushing is bonded for extra strength under heavy loads.
- Corrosion protection: The hardware is plated to stand up to road conditions.
- Bushing material: Polyurethane is firmer than the factory rubber, so it deflects less under load.
Specifications
| Part Number | W81924 |
| Part Name | Control Arm Bushing |
| Vehicle | 1986-1988 BMW 325 3 Series |
| Chassis Code | E30 |
| Bushing Color | Black |
| Bushing Inside Diameter | 19.4 mm |
| Bushing Length | 32.9 mm |
| Bushing Material | Polyurethane |
| Bushing Outside Diameter | 60.5 mm |
| Bushing Quantity | 2 |
| Durometer | 85 |
| Grade Type | Regular |
| Hardware Included | No |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 2.5 |
| Kit Contents | 2 Shell Bushings |
| Material | Polyurethane |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | Adds .5 Deg Caster |




