Product Details
This Whiteline Front Control Arm Lower Inner Rear Bushing fits the 1984-1987 BMW 325e 3 Series (E30). Chassis code: E30. The kit contains 2 shell bushings. Placement: front. Order it as part number W81924. Whiteline's note for this fit: Adds .5 degrees Caster.
A standard bushing only restores what the factory built. This one is designed to change the geometry, adding positive caster and changing front anti-dive behavior, in addition to resisting the deflection that soft rubber allows.
Installation is rated difficult, with about 2.5 hours of work listed. Plan on a wheel alignment afterward. To go with it on the 325e 3 Series, see Front Strut Tower Brace Quick Release Kit, Heavy Duty 24mm Front Sway Bar, and Heavy Duty Blade Adjustable 16mm Rear Sway Bar.
Features
- Bushing material: Polyurethane is firmer than the factory rubber, so it deflects less under load.
- Corrosion protection: A protective plating covers the metal components to guard against corrosion.
- Caster: Optimizes caster for better contact during roll and more stable steering.
- Bushing compound: The bushing material stands up to oil, grease, ozone, and weather.
- Material: Polyurethane construction.
- Bonded design: The bushing is bonded for strength where loads are highest.
Specifications
| Part Number | W81924 |
| Part Name | Control Arm Bushing |
| Vehicle | 1984-1987 BMW 325e 3 Series |
| Drivetrain | RWD |
| Chassis Code | E30 |
| Bushing Color | Black |
| Bushing Inside Diameter | 19.4 mm |
| Bushing Length | 32.9 mm |
| Bushing Material | Polyurethane |
| Bushing Outside Diameter | 60.5 mm |
| Bushing Quantity | 2 |
| Durometer | 85 |
| Grade Type | Regular |
| Hardware Included | No |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 2.5 |
| Kit Contents | 2 Shell Bushings |
| Material | Polyurethane |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | Adds .5 Deg Caster |



