Product Details
This Whiteline Front Control Arm Lower Inner Front Bushing fits the 2014-2021 Hyundai Veloster Turbo R-Spec. This part is for the front of the vehicle. The kit contains 4 bushings and 2 tubes. Chassis code: FS. The listing names the Turbo R-Spec trim. Part number W53492.
Every time the wheel moves, the control arm swings on its bushings. When they are soft or worn, the arm shifts under load, the alignment changes as the car moves, and steering and braking feel less precise. A stiffer bushing cuts that unwanted movement while still letting the arm pivot freely. The polyurethane used here deflects much less than the original rubber under the same load.
Installation is rated difficult, with about 2.5 hours of work listed. An alignment is required after installation. To go with it on the Veloster, see 14mm Adjustable Front Camber Bolts, Adjustable Front Sway Bar Link, and Front Lower Engine Mount.
Features
- Corrosion protection: The hardware is plated to stand up to road conditions.
- Grease: Supplied with molybdenum disulfide grease for extended service life.
- Bushing compound: A synthetic elastomer compound resists oil, grease, ozone, and weathering.
- Finish: Powder coat finish guards the metal against chips and corrosion.
- Material: The part is made of polyurethane.
- Self-lubricating: Internal grease reservoirs keep the bushing lubricated as it works.
Specifications
| Part Number | W53492 |
| Part Name | Control Arm Bushing |
| Vehicle | 2014-2021 Hyundai Veloster Turbo R-Spec |
| Drivetrain | FWD |
| Chassis Code | FS |
| Bushing 1 Inner Diameter | 12.2 mm |
| Bushing 1 Outer Diameter | 37.7 mm |
| Bushing Quantity | 4 Bushings |
| Grade Type | Regular |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 2.5 |
| Kit Contents | 4 Bushings, 2 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | - |