Product Details
This Whiteline Front Control Arm Lower Inner Front Bushing fits the 2009-2013 Subaru Legacy 3.0 R. The kit contains 4 bushings and 2 tubes. Part number W0506. It goes on the front of the vehicle. The listing names the 3.0 R trim.
Every time the wheel moves, the control arm swings on its bushings. When they are soft or worn, the arm shifts under load, the alignment changes as the car moves, and steering and braking feel less precise. A stiffer bushing cuts that unwanted movement while still letting the arm pivot freely. The polyurethane used here deflects much less than the original rubber under the same load.
Expect a difficult job of about 2.5 hours. Get the car aligned once it is back on the ground. To go with it on the Legacy, see Adjustable Rear Sway Bar Link, 14mm Adjustable Front Camber Bolts, and Adjustable Sway Bar Vehicle Link Kit.
Features
- Corrosion protection: Metal parts are plated to resist rust over the long term.
- Self-lubricating: The bushing carries its own grease supply in internal reservoirs, so it keeps moving freely.
- Material: Made from polyurethane.
- Grease: Supplied with molybdenum disulfide grease for extended service life.
- Finish: Powder coat finish guards the metal against chips and corrosion.
- Bushing compound: The bushing material stands up to oil, grease, ozone, and weather.
Specifications
| Part Number | W0506 |
| Part Name | Control Arm Bushing |
| Vehicle | 2009-2013 Subaru Legacy 3.0 R |
| Chassis Code | BM/BR |
| Bushing 1 Inner Diameter | 12.2 mm |
| Bushing 1 Outer Diameter | 37.4 mm |
| Bushing Quantity | 4 Bushings |
| Grade Type | Performance |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 2.5 |
| Kit Contents | 4 Bushings, 2 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | - |