Product Details
This Whiteline Front Control Arm Lower Inner Front Bushing (55mm Long) fits the 2002-2003 Subaru Impreza WRX Base, TS (GD). You receive 4 bushings and 2 tubes. Order it as part number W51709A. This part is for the front of the vehicle.
Every time the wheel moves, the control arm swings on its bushings. When they are soft or worn, the arm shifts under load, the alignment changes as the car moves, and steering and braking feel less precise. A stiffer bushing cuts that unwanted movement while still letting the arm pivot freely. The polyurethane used here deflects much less than the original rubber under the same load.
Expect a difficult job of about 2.5 hours. An alignment is required after installation. To go with it on the Impreza WRX Base, TS, see Front Steering Rack And Pinion Mount Bushing, Caster/Camber Offset Front Strut Mount Kit, and 20mm Rear Sway Bar Mount Bushing Kit.
Features
- Corrosion protection: Rust protection comes from plating on the metal parts.
- Material: Made from polyurethane.
- Self-lubricating: Internal grease reservoirs keep the bushing lubricated as it works.
- Bushing compound: The bushing material stands up to oil, grease, ozone, and weather.
- Finish: Powder coat finish guards the metal against chips and corrosion.
Specifications
| Part Number | W51709A |
| Part Name | Control Arm Bushing |
| Vehicle | 2002-2003 Subaru Impreza WRX Base, TS |
| Drivetrain | AWD |
| Chassis Code | GD |
| Bushing 1 Inner Diameter | 12.5 mm |
| Bushing 1 Outer Diameter | 37.1 mm |
| Bushing Quantity | 4 Bushings |
| Grade Type | Regular |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 2.5 |
| Kit Contents | 4 Bushings, 2 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | - |



