Product Details
This Whiteline Front Control Arm Lower Inner Front Bushing (55mm Long) fits the 1995-2004 Subaru Legacy L (BD/BG/BE/BH/BL/BP). Chassis code: BD/BG/BE/BH/BL/BP. Included: 4 bushings and 2 tubes. Position: front. Whiteline part number: W51709A.
Every time the wheel moves, the control arm swings on its bushings. When they are soft or worn, the arm shifts under load, the alignment changes as the car moves, and steering and braking feel less precise. A stiffer bushing cuts that unwanted movement while still letting the arm pivot freely. The polyurethane used here deflects much less than the original rubber under the same load.
Expect a difficult job of about 2.5 hours. An alignment is required after installation. To go with it on the Legacy, see Adjustable Rear Sway Bar Link, 14mm Adjustable Front Camber Bolts, and Front and Rear Sway Bar Kit.
Features
- Finish: A powder coated finish resists corrosion and wear.
- Corrosion protection: The hardware is plated to stand up to road conditions.
- Material: The part is made of polyurethane.
- Self-lubricating: Grease reservoirs inside the bushing feed lubrication as it moves.
- Bushing compound: The elastomer formulation is chosen to shrug off oil, grease, ozone, and the elements.
Specifications
| Part Number | W51709A |
| Part Name | Control Arm Bushing |
| Vehicle | 1995-2004 Subaru Legacy L |
| Drivetrain | FWD/AWD |
| Chassis Code | BD/BG/BE/BH/BL/BP |
| Bushing 1 Inner Diameter | 12.5 mm |
| Bushing 1 Outer Diameter | 37.1 mm |
| Bushing Quantity | 4 Bushings |
| Grade Type | Regular |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 2.5 |
| Kit Contents | 4 Bushings, 2 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | - |




