Product Details
This Whiteline Front Control Arm Lower Inner Front Bushing (55mm Long) fits the 1995-2000 Subaru Legacy Brighton (BD/BG/BE/BH). It goes on the front of the vehicle. Part number W51709A. You receive 4 bushings and 2 tubes.
Every time the wheel moves, the control arm swings on its bushings. When they are soft or worn, the arm shifts under load, the alignment changes as the car moves, and steering and braking feel less precise. A stiffer bushing cuts that unwanted movement while still letting the arm pivot freely. The polyurethane used here deflects much less than the original rubber under the same load.
Whiteline rates the install as difficult and lists about 2.5 hours. Get the car aligned once it is back on the ground. We also list Adjustable Rear Sway Bar Link, 14mm Adjustable Front Camber Bolts, and Front and Rear Sway Bar Kit for the Legacy.
Features
- Material: Built from polyurethane.
- Corrosion protection: Metal parts are plated to resist rust over the long term.
- Bushing compound: The bushing material stands up to oil, grease, ozone, and weather.
- Finish: The metal parts are powder coated for durability.
- Self-lubricating: The bushing carries its own grease supply in internal reservoirs, so it keeps moving freely.
Specifications
| Part Number | W51709A |
| Part Name | Control Arm Bushing |
| Vehicle | 1995-2000 Subaru Legacy Brighton |
| Drivetrain | FWD/AWD |
| Chassis Code | BD/BG/BE/BH |
| Bushing 1 Inner Diameter | 12.5 mm |
| Bushing 1 Outer Diameter | 37.1 mm |
| Bushing Quantity | 4 Bushings |
| Grade Type | Regular |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 2.5 |
| Kit Contents | 4 Bushings, 2 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | - |




