Product Details
This Whiteline Front Control Arm Lower Inner Front Bushing (55mm Long) fits the 1995-1997 Subaru Legacy LSi (BD/BG). You receive 4 bushings and 2 tubes. Whiteline part number: W51709A. Placement: front.
Every time the wheel moves, the control arm swings on its bushings. When they are soft or worn, the arm shifts under load, the alignment changes as the car moves, and steering and braking feel less precise. A stiffer bushing cuts that unwanted movement while still letting the arm pivot freely. The polyurethane used here deflects much less than the original rubber under the same load.
Whiteline rates the install as difficult and lists about 2.5 hours. Get the car aligned once it is back on the ground. To go with it on the Legacy, see Rear Sway Bar Link, 14mm Adjustable Front Camber Bolts, and Front Strut Tower Brace Quick Release Kit.
Features
- Corrosion protection: A protective plating covers the metal components to guard against corrosion.
- Material: The part is made of polyurethane.
- Bushing compound: Oil, grease, ozone, and weather do not break down the synthetic elastomer used in the bushings.
- Finish: The metal is powder coated, which resists corrosion and wear.
- Self-lubricating: Grease reservoirs inside the bushing feed lubrication as it moves.
Specifications
| Part Number | W51709A |
| Part Name | Control Arm Bushing |
| Vehicle | 1995-1997 Subaru Legacy LSi |
| Drivetrain | FWD/AWD |
| Chassis Code | BD/BG |
| Bushing 1 Inner Diameter | 12.5 mm |
| Bushing 1 Outer Diameter | 37.1 mm |
| Bushing Quantity | 4 Bushings |
| Grade Type | Regular |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 2.5 |
| Kit Contents | 4 Bushings, 2 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | - |



