Product Details
This Whiteline Front Control Arm Lower Inner Front Bushing (55mm Long) fits the 1993-1995 Subaru Impreza WRX (GC/GF). Order it as part number W51709A. This part is for the front of the vehicle. Included: 4 bushings and 2 tubes.
Bushings work out of sight, but they decide how well a suspension holds its geometry. A soft or tired control arm bushing allows play that shows up as vague steering, a wandering feel under braking, or a clunk over bumps. Fitting a firmer one takes that slack out. The polyurethane used here deflects much less than the original rubber under the same load.
Installation is rated difficult, with about 2.5 hours of work listed. Plan on a wheel alignment afterward. To go with it on the Impreza WRX, see 14mm Adjustable Front Camber Bolts, Front Strut Tower Brace Quick Release Kit, and Front Gearbox Mount Bushing.
Features
- Self-lubricating: The bushing carries its own grease supply in internal reservoirs, so it keeps moving freely.
- Material: Built from polyurethane.
- Bushing compound: Oil, grease, ozone, and weather do not break down the synthetic elastomer used in the bushings.
- Finish: Powder coating covers the metal for protection against chips and rust.
- Corrosion protection: Rust protection comes from plating on the metal parts.
Specifications
| Part Number | W51709A |
| Part Name | Control Arm Bushing |
| Vehicle | 1993-1995 Subaru Impreza WRX |
| Drivetrain | AWD |
| Chassis Code | GC/GF |
| Bushing 1 Inner Diameter | 12.5 mm |
| Bushing 1 Outer Diameter | 37.1 mm |
| Bushing Quantity | 4 Bushings |
| Grade Type | Regular |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 2.5 |
| Kit Contents | 4 Bushings, 2 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | - |



