Product Details
This Whiteline Front Control Arm Lower Inner Front Bushing (34.7mm OD) fits the 2002-2007 Mitsubishi Lancer ES (CS). In the box: 4 bushings and 2 tubes. Part number W51988. This part is for the front of the vehicle.
Every time the wheel moves, the control arm swings on its bushings. When they are soft or worn, the arm shifts under load, the alignment changes as the car moves, and steering and braking feel less precise. A stiffer bushing cuts that unwanted movement while still letting the arm pivot freely. The polyurethane used here deflects much less than the original rubber under the same load.
Expect a difficult job of about 2.5 hours. An alignment is required after installation. To go with it on the Lancer, see 12mm Adjustable Front Camber Bolts, Rear Sway Bar Link, and Front Strut Tower Brace Quick Release Kit.
Features
- Self-lubricating: Internal grease reservoirs keep the bushing lubricated as it works.
- Material: The part is made of polyurethane.
- Corrosion protection: Plated finish keeps rust off the hardware.
- Bushing compound: Oil, grease, ozone, and weather do not break down the synthetic elastomer used in the bushings.
Specifications
| Part Number | W51988 |
| Part Name | Control Arm Bushing |
| Vehicle | 2002-2007 Mitsubishi Lancer ES |
| Drivetrain | FWD |
| Chassis Code | CS |
| Bushing 1 Inner Diameter | 12.2 mm |
| Bushing 1 Outer Diameter | 34.7 mm |
| Bushing Quantity | 4 Bushings |
| Grade Type | Regular |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 2.5 |
| Kit Contents | 4 Bushings, 2 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | - |



