Product Details
This Whiteline Front Control Arm Lower Inner Front Bushing (34.7mm OD) fits the 1993-1998 Hyundai Sonata Base, GLS (Y3). Chassis code: Y3. Placement: front. Included: 4 bushings and 2 tubes. Part number W51988.
Every time the wheel moves, the control arm swings on its bushings. When they are soft or worn, the arm shifts under load, the alignment changes as the car moves, and steering and braking feel less precise. A stiffer bushing cuts that unwanted movement while still letting the arm pivot freely. Polyurethane resists deflection far better than the soft rubber it replaces.
Whiteline rates the install as difficult and lists about 2.5 hours. Get the car aligned once it is back on the ground. To go with it on the Sonata, see Front Sway Bar Washer Kit and Front Sway Bar Link Kit - Upgrade.
Features
- Corrosion protection: The hardware is plated to stand up to road conditions.
- Bushing compound: Oil, grease, ozone, and weather do not break down the synthetic elastomer used in the bushings.
- Material: Made from polyurethane.
- Self-lubricating: The bushing carries its own grease supply in internal reservoirs, so it keeps moving freely.
Specifications
| Part Number | W51988 |
| Part Name | Control Arm Bushing |
| Vehicle | 1993-1998 Hyundai Sonata Base, GLS |
| Chassis Code | Y3 |
| Bushing 1 Inner Diameter | 12.2 mm |
| Bushing 1 Outer Diameter | 34.7 mm |
| Bushing Quantity | 4 Bushings |
| Grade Type | Regular |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 2.5 |
| Kit Contents | 4 Bushings, 2 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | - |



