Product Details
This Whiteline Front Control Arm Lower Inner Front Bushing fits the 2013-2016 Buick Verano (Delta II). Placement: front. Included: 4 bushings and 2 tubes. The part number is W53431.
A control arm bushing is the pivot where the arm joins the chassis or the wheel carrier. Factory rubber is chosen for quiet and comfort, so it squashes under braking, acceleration, and cornering and lets the arm move more than it should. A firmer replacement keeps the arm where it belongs, which steadies the alignment and gives the car a more consistent feel. The polyurethane used here deflects much less than the original rubber under the same load.
Whiteline rates the install as difficult and lists about 2.5 hours. Get the car aligned once it is back on the ground. To go with it on the Verano, see 12mm Adjustable Front Camber Bolts, Heavy Duty Blade Adjustable 22mm Rear Sway Bar, and 22mm Rear Sway Bar Bushing Kit.
Features
- Bushing compound: The bushing material stands up to oil, grease, ozone, and weather.
- Finish: A powder coated finish resists corrosion and wear.
- Corrosion protection: Plated finish keeps rust off the hardware.
- Material: Made from polyurethane.
- Grease: Supplied with molybdenum disulfide grease for extended service life.
- Self-lubricating: Internal grease reservoirs keep the bushing lubricated as it works.
Specifications
| Part Number | W53431 |
| Part Name | Control Arm Bushing |
| Vehicle | 2013-2016 Buick Verano |
| Chassis Code | Delta II |
| Bushing 1 Inner Diameter | 12.2 mm |
| Bushing 1 Outer Diameter | 40 mm |
| Bushing Quantity | 4 Bushings |
| Grade Type | Regular |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 2.5 |
| Kit Contents | 4 Bushings, 2 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | - |


