Product Details
This Whiteline Front Control Arm Lower Inner Front Bushing fits the 2012-2021 Hyundai Veloster Base . Order it as part number W53492. This part is for the front of the vehicle. Included: 4 bushings and 2 tubes.
Bushings work out of sight, but they decide how well a suspension holds its geometry. A soft or tired control arm bushing allows play that shows up as vague steering, a wandering feel under braking, or a clunk over bumps. Fitting a firmer one takes that slack out. The polyurethane used here deflects much less than the original rubber under the same load.
Installation is rated difficult, with about 2.5 hours of work listed. Plan on a wheel alignment afterward. To go with it on the Veloster, see 14mm Adjustable Front Camber Bolts, Adjustable Front Sway Bar Link, and Front Lower Engine Mount.
Features
- Self-lubricating: Internal grease reservoirs keep the bushing lubricated as it works.
- Material: The part is made of polyurethane.
- Bushing compound: Oil, grease, ozone, and weather do not break down the synthetic elastomer used in the bushings.
- Grease: Molybdenum disulfide grease comes with it for a longer service life.
- Finish: Powder coat finish guards the metal against chips and corrosion.
- Corrosion protection: Rust protection comes from plating on the metal parts.
Specifications
| Part Number | W53492 |
| Part Name | Control Arm Bushing |
| Vehicle | 2012-2021 Hyundai Veloster Base |
| Drivetrain | FWD |
| Bushing 1 Inner Diameter | 12.2 mm |
| Bushing 1 Outer Diameter | 37.7 mm |
| Bushing Quantity | 4 Bushings |
| Grade Type | Regular |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 2.5 |
| Kit Contents | 4 Bushings, 2 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | - |


