Product Details
This Whiteline Front Control Arm Lower Inner Front Bushing fits the 2008-2009 Subaru Legacy 3.0 R Limited (BM/BR). Whiteline part number: W0506. Included: 4 bushings and 2 tubes. Placement: front.
Bushings work out of sight, but they decide how well a suspension holds its geometry. A soft or tired control arm bushing allows play that shows up as vague steering, a wandering feel under braking, or a clunk over bumps. Fitting a firmer one takes that slack out. The polyurethane used here deflects much less than the original rubber under the same load.
Installation is rated difficult, with about 2.5 hours of work listed. Plan on a wheel alignment afterward. We also list Adjustable Rear Sway Bar Link, 14mm Adjustable Front Camber Bolts, and Front and Rear Sway Bar Kit for the Legacy.
Features
- Corrosion protection: Metal parts are plated to resist rust over the long term.
- Finish: Powder coat finish guards the metal against chips and corrosion.
- Grease: Molybdenum disulfide grease comes with it for a longer service life.
- Material: Built from polyurethane.
- Self-lubricating: The bushing carries its own grease supply in internal reservoirs, so it keeps moving freely.
- Bushing compound: Oil, grease, ozone, and weather do not break down the synthetic elastomer used in the bushings.
Specifications
| Part Number | W0506 |
| Part Name | Control Arm Bushing |
| Vehicle | 2008-2009 Subaru Legacy 3.0 R Limited |
| Chassis Code | BM/BR |
| Bushing 1 Inner Diameter | 12.2 mm |
| Bushing 1 Outer Diameter | 37.4 mm |
| Bushing Quantity | 4 Bushings |
| Grade Type | Performance |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 2.5 |
| Kit Contents | 4 Bushings, 2 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | - |



