Product Details
This Whiteline Front Control Arm Lower Inner Front Bushing fits the 2000-2005 Toyota Echo Base (XP10). Included: 4 bushings and 4 tubes. Part number W53374. This part is for the front of the vehicle.
A control arm bushing is the pivot where the arm joins the chassis or the wheel carrier. Factory rubber is chosen for quiet and comfort, so it squashes under braking, acceleration, and cornering and lets the arm move more than it should. A firmer replacement keeps the arm where it belongs, which steadies the alignment and gives the car a more consistent feel. The polyurethane used here deflects much less than the original rubber under the same load.
Whiteline rates the install as difficult and lists about 2.5 hours. An alignment is required after installation. Other Whiteline parts we list for the Echo: 14mm Adjustable Front Camber Bolts and Front Sway Bar Link Bushing Kit.
Features
- Finish: The metal is powder coated, which resists corrosion and wear.
- Corrosion protection: Rust protection comes from plating on the metal parts.
- Material: Polyurethane construction.
- Grease: Moly grease is supplied to prolong the life of the parts.
- Bushing compound: The bushing material stands up to oil, grease, ozone, and weather.
- Self-lubricating: The bushing carries its own grease supply in internal reservoirs, so it keeps moving freely.
Specifications
| Part Number | W53374 |
| Part Name | Control Arm Bushing |
| Vehicle | 2000-2005 Toyota Echo Base |
| Chassis Code | XP10 |
| Bushing 1 Inner Diameter | 12.2 mm |
| Bushing 1 Outer Diameter | 30.8 mm |
| Bushing 2 Inner Diameter | 14.3 mm |
| Bushing Quantity | 4 Bushings |
| Grade Type | Regular |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 2.5 |
| Kit Contents | 4 Bushings, 4 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | - |


