Product Details
This Whiteline Front Control Arm Lower Inner Front Bushing fits the 1997 Volkswagen Cabrio High Line (A3). You receive 4 bushings and 2 tubes. It goes on the front of the vehicle. Whiteline's note for this fit: Standard Replacement. Whiteline part number: W52091.
Every time the wheel moves, the control arm swings on its bushings. When they are soft or worn, the arm shifts under load, the alignment changes as the car moves, and steering and braking feel less precise. A stiffer bushing cuts that unwanted movement while still letting the arm pivot freely. The polyurethane used here deflects much less than the original rubber under the same load.
Expect a difficult job of about 2.5 hours. Plan on a wheel alignment afterward. We also list 12mm Adjustable Front Camber Bolts for the Cabrio.
Features
- Finish: Powder coat finish guards the metal against chips and corrosion.
- Corrosion protection: Metal parts are plated to resist rust over the long term.
- Self-lubricating: Built-in grease reservoirs provide continual lubrication and reduce friction.
- Grease: Moly grease is supplied to prolong the life of the parts.
- Material: The part is made of polyurethane.
- Bushing compound: The bushing material stands up to oil, grease, ozone, and weather.
Specifications
| Part Number | W52091 |
| Part Name | Control Arm Bushing |
| Vehicle | 1997 Volkswagen Cabrio High Line |
| Chassis Code | A3 |
| Bushing 1 Inner Diameter | 12.2 mm |
| Bushing 1 Outer Diameter | 30.2 mm |
| Bushing Quantity | 4 Bushings |
| Grade Type | Regular |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 2.5 |
| Kit Contents | 4 Bushings, 2 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | Standard Replacement - 30mm OD |


