Product Details
This Whiteline Front Control Arm Lower Inner Front Bushing fits the 1992-1993 Volkswagen Cabriolet Classic (A1). Application note: Standard Replacement. The kit contains 4 bushings and 2 tubes. Order it as part number W52091. Placement: front.
Every time the wheel moves, the control arm swings on its bushings. When they are soft or worn, the arm shifts under load, the alignment changes as the car moves, and steering and braking feel less precise. A stiffer bushing cuts that unwanted movement while still letting the arm pivot freely. The polyurethane used here deflects much less than the original rubber under the same load.
Expect a difficult job of about 2.5 hours. Get the car aligned once it is back on the ground. Other Whiteline parts we list for the Cabriolet: 12mm Adjustable Front Camber Bolts.
Features
- Corrosion protection: Plated finish keeps rust off the hardware.
- Bushing compound: Oil, grease, ozone, and weather do not break down the synthetic elastomer used in the bushings.
- Grease: Molybdenum disulfide grease comes with it for a longer service life.
- Finish: A powder coated finish resists corrosion and wear.
- Self-lubricating: Grease reservoirs inside the bushing feed lubrication as it moves.
- Material: Made from polyurethane.
Specifications
| Part Number | W52091 |
| Part Name | Control Arm Bushing |
| Vehicle | 1992-1993 Volkswagen Cabriolet Classic |
| Chassis Code | A1 |
| Bushing 1 Inner Diameter | 12.2 mm |
| Bushing 1 Outer Diameter | 30.2 mm |
| Bushing Quantity | 4 Bushings |
| Grade Type | Regular |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 2.5 |
| Kit Contents | 4 Bushings, 2 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | Standard Replacement - 30mm OD |


