Product Details
This Whiteline Front Control Arm Lower Inner Front Bushing (14mm ID) fits the 2004-2005 Mitsubishi Lancer. Whiteline part number: W0593. Position: front. Included: 4 bushings and 2 tubes. It is listed for the CS chassis.
Bushings work out of sight, but they decide how well a suspension holds its geometry. A soft or tired control arm bushing allows play that shows up as vague steering, a wandering feel under braking, or a clunk over bumps. Fitting a firmer one takes that slack out. The polyurethane used here deflects much less than the original rubber under the same load.
Expect a difficult job of about 2.5 hours. An alignment is required after installation. Working on the same car? We also list 14mm Adjustable Front Camber Bolts, Adjustable Sway Bar Vehicle Link Kit, and Rear Sway Bar Link for the Lancer.
Features
- Bushing compound: A synthetic elastomer compound resists oil, grease, ozone, and weathering.
- Grease: Molybdenum disulfide grease is included to help the parts last.
- Corrosion protection: The hardware is plated to stand up to road conditions.
- Self-lubricating: Grease reservoirs inside the bushing feed lubrication as it moves.
- Finish: Powder coating covers the metal for protection against chips and rust.
- Material: Built from polyurethane.
Specifications
| Part Number | W0593 |
| Part Name | Control Arm Bushing |
| Vehicle | 2004-2005 Mitsubishi Lancer Sportback, Sportback Ralliart |
| Chassis Code | CS |
| Drivetrain | FWD |
| Bushing 1 Inner Diameter | 14.3 mm |
| Bushing 1 Outer Diameter | 34.7 mm |
| Bushing Quantity | 4 Bushings |
| Grade Type | Performance |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 2.5 |
| Kit Contents | 4 Bushings, 2 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | - |