Product Details
This Whiteline Front Control Arm Lower Inner Front Bushing (14mm ID) fits the 2008-2013 Mitsubishi Lancer DE (CY). The kit contains 4 bushings and 2 tubes. Order it as part number W0593. It goes on the front of the vehicle.
Bushings work out of sight, but they decide how well a suspension holds its geometry. A soft or tired control arm bushing allows play that shows up as vague steering, a wandering feel under braking, or a clunk over bumps. Fitting a firmer one takes that slack out. The polyurethane used here deflects much less than the original rubber under the same load.
Expect a difficult job of about 2.5 hours. Plan on a wheel alignment afterward. To go with it on the Lancer, see Adjustable Rear Sway Bar Link, 14mm Adjustable Front Camber Bolts, and Adjustable Sway Bar Vehicle Link Kit.
Features
- Material: Polyurethane construction.
- Corrosion protection: The hardware is plated to stand up to road conditions.
- Grease: Moly grease is supplied to prolong the life of the parts.
- Finish: The metal is powder coated, which resists corrosion and wear.
- Bushing compound: The bushing material stands up to oil, grease, ozone, and weather.
- Self-lubricating: The bushing carries its own grease supply in internal reservoirs, so it keeps moving freely.
Specifications
| Part Number | W0593 |
| Part Name | Control Arm Bushing |
| Vehicle | 2008-2013 Mitsubishi Lancer DE |
| Chassis Code | CY |
| Drivetrain | AWD/FWD |
| Bushing 1 Inner Diameter | 14.3 mm |
| Bushing 1 Outer Diameter | 34.7 mm |
| Bushing Quantity | 4 Bushings |
| Grade Type | Performance |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 2.5 |
| Kit Contents | 4 Bushings, 2 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | - |


