Product Details
This Whiteline Front Control Arm Lower Inner Front Bushing (14mm ID) fits the 2006-2013 Mitsubishi Lancer SE (CY). Placement: front. In the box: 4 bushings and 2 tubes. Part number W0593.
Every time the wheel moves, the control arm swings on its bushings. When they are soft or worn, the arm shifts under load, the alignment changes as the car moves, and steering and braking feel less precise. A stiffer bushing cuts that unwanted movement while still letting the arm pivot freely. The polyurethane used here deflects much less than the original rubber under the same load.
Installation is rated difficult, with about 2.5 hours of work listed. Get the car aligned once it is back on the ground. We also list Adjustable Rear Sway Bar Link, 14mm Adjustable Front Camber Bolts, and Adjustable Sway Bar Vehicle Link Kit for the Lancer.
Features
- Bushing compound: The elastomer formulation is chosen to shrug off oil, grease, ozone, and the elements.
- Finish: A powder coated finish resists corrosion and wear.
- Grease: Supplied with molybdenum disulfide grease for extended service life.
- Self-lubricating: Internal grease reservoirs keep the bushing lubricated as it works.
- Corrosion protection: Metal parts are plated to resist rust over the long term.
- Material: Made from polyurethane.
Specifications
| Part Number | W0593 |
| Part Name | Control Arm Bushing |
| Vehicle | 2006-2013 Mitsubishi Lancer SE |
| Chassis Code | CY |
| Drivetrain | AWD/FWD |
| Bushing 1 Inner Diameter | 14.3 mm |
| Bushing 1 Outer Diameter | 34.7 mm |
| Bushing Quantity | 4 Bushings |
| Grade Type | Performance |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 2.5 |
| Kit Contents | 4 Bushings, 2 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | - |



