Product Details
This Whiteline Front Control Arm Lower Inner Front Bushing (14mm ID) fits the 2002-2006 Mitsubishi Lancer OZ Rally (CS). Placement: front. Part number W0593. Included: 4 bushings and 2 tubes. Chassis code: CS.
Every time the wheel moves, the control arm swings on its bushings. When they are soft or worn, the arm shifts under load, the alignment changes as the car moves, and steering and braking feel less precise. A stiffer bushing cuts that unwanted movement while still letting the arm pivot freely. Polyurethane resists deflection far better than the soft rubber it replaces.
Expect a difficult job of about 2.5 hours. Plan on a wheel alignment afterward. To go with it on the Lancer, see 14mm Adjustable Front Camber Bolts, Adjustable Sway Bar Vehicle Link Kit, and Rear Sway Bar Link.
Features
- Grease: Moly grease is supplied to prolong the life of the parts.
- Finish: The metal is powder coated, which resists corrosion and wear.
- Bushing compound: Oil, grease, ozone, and weather do not break down the synthetic elastomer used in the bushings.
- Self-lubricating: The bushing carries its own grease supply in internal reservoirs, so it keeps moving freely.
- Corrosion protection: The hardware is plated to stand up to road conditions.
- Material: Polyurethane construction.
Specifications
| Part Number | W0593 |
| Part Name | Control Arm Bushing |
| Vehicle | 2002-2006 Mitsubishi Lancer OZ Rally |
| Drivetrain | FWD |
| Chassis Code | CS |
| Bushing 1 Inner Diameter | 14.3 mm |
| Bushing 1 Outer Diameter | 34.7 mm |
| Bushing Quantity | 4 Bushings |
| Grade Type | Performance |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 2.5 |
| Kit Contents | 4 Bushings, 2 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | - |



