Product Details
This Whiteline Front Lower Inner Control Arm Bushing fits the 2006-2015 Nissan Xterra X (N50). The part number is W53272. Included: 4 shell bushings, 4 tubes, and 8 washers. Position: front. Application note: Standard Replacement.
Every time the wheel moves, the control arm swings on its bushings. When they are soft or worn, the arm shifts under load, the alignment changes as the car moves, and steering and braking feel less precise. A stiffer bushing cuts that unwanted movement while still letting the arm pivot freely. The polyurethane used here deflects much less than the original rubber under the same load.
Expect a difficult job of about 4 hours. An alignment is required after installation. To go with it on the Xterra, see Front Sway Bar Link Assembly, Rear Essential Vehicle Kit, and Front Upper Control Arm Set - Fixed Offset.
Features
- Corrosion protection: Metal parts are plated to resist rust over the long term.
- Bonded design: The bushing is bonded for extra strength under heavy loads.
- Finish: A powder coated finish resists corrosion and wear.
- Material: Made from polyurethane.
- Grease: Moly grease is supplied to prolong the life of the parts.
- Install guide: Instructions for fitting are packed in the box.
Specifications
| Part Number | W53272 |
| Part Name | Control Arm Bushing |
| Vehicle | 2006-2015 Nissan Xterra X |
| Drivetrain | RWD/4WD |
| Chassis Code | N50 |
| Bushing 1 Inner Diameter | 14.3 mm |
| Bushing 1 Outer Diameter | 43 mm |
| Bushing Quantity | 4 Shell Bushings |
| Grade Type | Regular |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 4 |
| Kit Contents | 4 Shell Bushings, 4 Tubes, 8 Washers |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | Standard Replacement |


