Product Details
This Whiteline Front Lower Inner Control Arm Bushing fits the 2005-2010 Nissan Pathfinder SE (R51). Part number W53272. It goes on the front of the vehicle. Application note: Standard Replacement. Included: 4 shell bushings, 4 tubes, and 8 washers.
Every time the wheel moves, the control arm swings on its bushings. When they are soft or worn, the arm shifts under load, the alignment changes as the car moves, and steering and braking feel less precise. A stiffer bushing cuts that unwanted movement while still letting the arm pivot freely. The polyurethane used here deflects much less than the original rubber under the same load.
Installation is rated difficult, with about 4 hours of work listed. An alignment is required after installation. To go with it on the Pathfinder, see Front Sway Bar Link Assembly, Rear Differential Bushing Kit, and Front Upper Control Arm Set - Fixed Offset.
Features
- Grease: Supplied with molybdenum disulfide grease for extended service life.
- Finish: The metal is powder coated, which resists corrosion and wear.
- Self-lubricating: Internal grease reservoirs keep the bushing lubricated as it works.
- Material: Polyurethane construction.
- Bonded design: A bonded design adds strength for high load applications.
- Install guide: Written install instructions are included with the part.
Specifications
| Part Number | W53272 |
| Part Name | Control Arm Bushing |
| Vehicle | 2005-2010 Nissan Pathfinder SE |
| Drivetrain | RWD/4WD |
| Chassis Code | R51 |
| Bushing 1 Inner Diameter | 14.3 mm |
| Bushing 1 Outer Diameter | 43 mm |
| Bushing Quantity | 4 Shell Bushings |
| Grade Type | Regular |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 4 |
| Kit Contents | 4 Shell Bushings, 4 Tubes, 8 Washers |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | Standard Replacement |


