Product Details
This Whiteline Front Lower Inner Control Arm Bushing fits the 1963-1966 Ford Falcon Futura. Part number W52081. Whiteline's note for this fit: Fitter friendly design: installs into original shell. It goes on the front of the vehicle. You receive 4 bushings and 2 tubes.
Every time the wheel moves, the control arm swings on its bushings. When they are soft or worn, the arm shifts under load, the alignment changes as the car moves, and steering and braking feel less precise. A stiffer bushing cuts that unwanted movement while still letting the arm pivot freely. The polyurethane used here deflects much less than the original rubber under the same load.
Expect a moderate job of about 2 hours. An alignment is required after installation. To go with it on the Falcon, see Front Sway Bar Washer Kit, Front Sway Bar Link, and Front Shock Absorber Upper Bushing (Koni Shocks Only).
Features
- Corrosion protection: A protective plating covers the metal components to guard against corrosion.
- Material: The part is made of polyurethane.
- Easy to fit: Installation does not call for special skills or tools.
- Bushing compound: Oil, grease, ozone, and weather do not break down the synthetic elastomer used in the bushings.
- Self-lubricating: Internal grease reservoirs keep the bushing lubricated as it works.
- Grease: Molybdenum disulfide grease is included to help the parts last.
Specifications
| Part Number | W52081 |
| Part Name | Control Arm Bushing |
| Vehicle | 1963-1966 Ford Falcon Futura |
| Drivetrain | RWD |
| Bushing 1 Inner Diameter | 12.8 mm |
| Bushing 1 Outer Diameter | 23.5 mm |
| Bushing Quantity | 4 Bushings |
| Grade Type | Regular |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 2 |
| Kit Contents | 4 Bushings, 2 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | Fitter friendly design - installs into original shell |



