Product Details
Made to fit the 2011 BMW 335is 3 Series, the Front Lower Control Arm Bushing Kit (46.1mm OD) from Whiteline. Part number KCA431. Whiteline's note for this fit: Adds 0.5 degrees Camber. Chassis code: E92/E93. It goes on the front of the vehicle. You receive 2 bushings, 2 tubes, 2 bolts, and 2 nuts.
Camber is the sideways lean of the wheel when viewed from the front. An offset control arm bushing places the pivot slightly off-center, which shifts the wheel's camber by a small, fixed amount without replacing the arm. On a lowered car that is often enough to bring the tires back toward an even footprint.
Expect a difficult job of about 2.5 hours. Plan on a wheel alignment afterward. Other Whiteline parts we list for the 335is 3 Series: Adjustable Front Sway Bar Link, Rear Subframe Mount Bushing, and Front and Rear Essential Vehicle Kit.
Features
- Bushing compound: Oil, grease, ozone, and weather do not break down the synthetic elastomer used in the bushings.
- Finish: Powder coating covers the metal for protection against chips and rust.
- Material: The part is made of polyurethane.
- Corrosion protection: Rust protection comes from plating on the metal parts.
- Install guide: Step-by-step installation instructions come with it.
- Hardware: The kit includes mounting hardware.
Specifications
| Part Number | KCA431 |
| Part Name | Control Arm Bushing |
| Vehicle | 2011 BMW 335is 3 Series |
| Chassis Code | E92/E93 |
| Bushing 1 Inner Diameter | 12 mm |
| Bushing 1 Outer Diameter | 46.1 mm |
| Bushing Quantity | 2 Bushings |
| Grade Type | Performance |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 2.5 |
| Kit Contents | 2 Bushings, 2 Tubes, 2 Bolts, 2 Nuts |
| Material | Polyurethane |
| Mounting Hardware Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | Adds 0.5Degree Camber |