Product Details
This Whiteline Front Lower Control Arm Bushing Kit fits the 2008-2010 Dodge Challenger SRT8 Base (LC). Placement: front. Whiteline part number: W53336. You receive 2 shell bushings and 2 tubes.
Bushings work out of sight, but they decide how well a suspension holds its geometry. A soft or tired control arm bushing allows play that shows up as vague steering, a wandering feel under braking, or a clunk over bumps. Fitting a firmer one takes that slack out. The polyurethane used here deflects much less than the original rubber under the same load.
Whiteline rates the install as difficult and lists about 2.5 hours. Get the car aligned once it is back on the ground. We also list Rear Subframe Mount Bushing, Front and Rear Sway Bar Kit, and Rear Trailing Arm Lower Front Bushing for the Challenger SRT8.
Features
- Grease: Molybdenum disulfide grease is included to help the parts last.
- Bushing compound: The bushing material stands up to oil, grease, ozone, and weather.
- Install guide: Instructions for fitting are packed in the box.
- Self-lubricating: The bushing carries its own grease supply in internal reservoirs, so it keeps moving freely.
- Material: Built from polyurethane.
- Corrosion protection: Metal parts are plated to resist rust over the long term.
Specifications
| Part Number | W53336 |
| Part Name | Control Arm Bushing |
| Vehicle | 2008-2010 Dodge Challenger SRT8 Base |
| Drivetrain | RWD |
| Chassis Code | LC |
| Bushing 1 Inner Diameter | 14.2 mm |
| Bushing 1 Outer Diameter | 69.7 mm |
| Bushing 2 Outer Diameter | 66.6 mm |
| Bushing Quantity | 2 Shell Bushings |
| Grade Type | Regular |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 2.5 |
| Kit Contents | 2 Shell Bushings, 2 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | - |



