Product Details
This Whiteline Front Lower Control Arm Bushing Kit fits the 2006 Dodge Charger Daytona R/T (LX). Included: 2 shell bushings and 2 tubes. Whiteline part number: W53336. Placement: front.
Bushings work out of sight, but they decide how well a suspension holds its geometry. A soft or tired control arm bushing allows play that shows up as vague steering, a wandering feel under braking, or a clunk over bumps. Fitting a firmer one takes that slack out. The polyurethane used here deflects much less than the original rubber under the same load.
Whiteline rates the install as difficult and lists about 2.5 hours. An alignment is required after installation. To go with it on the Charger, see Rear Subframe Mount Bushing, Front Sway Bar Link Kit, and Front and Rear Sway Bar Kit.
Features
- Grease: Molybdenum disulfide grease is included to help the parts last.
- Bonded design: A bonded design adds strength for high load applications.
- Material: Polyurethane construction.
- Finish: Powder coat finish guards the metal against chips and corrosion.
- Install guide: Written install instructions are included with the part.
- Corrosion protection: A protective plating covers the metal components to guard against corrosion.
Specifications
| Part Number | W53336 |
| Part Name | Control Arm Bushing |
| Vehicle | 2006 Dodge Charger Daytona R/T |
| Drivetrain | RWD |
| Chassis Code | LX |
| Bushing 1 Inner Diameter | 14.2 mm |
| Bushing 1 Outer Diameter | 69.7 mm |
| Bushing 2 Outer Diameter | 66.6 mm |
| Bushing Quantity | 2 Shell Bushings |
| Grade Type | Regular |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 2.5 |
| Kit Contents | 2 Shell Bushings, 2 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | - |



